TES-92 ElectroSmog Meter
-
The frequency ranges 50MHz to 3.5GHz.
-
3-axis isotropic measurements of EMF.
-
Non-directional (isotropic) measurement with
-
three-channel measurement probe.
-
Backlight LCD display
-
High dynamic range.
-
Configurable alarm threshold and memory function.
-
Easy & safe to use.
Category: EMF Tester
Description
ELECTRICAL SPECIFICATIONS
Sensor type
|
Electric field (E).
|
|
Frequency range
|
50MHz to 3.5GHz
|
|
Directional characteristic
|
Isotropic, 3-dimensional.
|
|
Measurement range (CW signal > 50MHz)
|
20mV/m to 108.0V/m ,
53μA/m to 286.4mA/m ,
1μW/m² to 30.93W/m² ,
0μW/cm² to 3.093mW/cm²
|
|
Dynamic range
|
Typical 75dB
|
|
Absolute error (@1V/m and 50MHz)
|
±1.0dB
|
|
Frequency response (taking into account typ. CAL factor)
|
±1.0dB (50MHz to 1.9GHz)
±2.4dB (1.9GHz to 3.5GHz)
|
|
Isotropy deviation
|
Typ. ±1.0dB for f >50MHz
|
|
Overload limit
|
10.61mW/cm² (200V/m)
|
|
Temperature response (0 to 50°C)
|
±0.2dB
|
|
GENERAL SPECIFICATIONS
Measurement method
|
Digital, triaxial measurement
|
Directional characteristic
|
Isotropic, triaxial
|
Measurement range selection
|
One continuous range
|
Display resolution
|
0.1mV/m, 0.1μA/m, 0.1μW/m², 0.001μW/cm²
|
Setting time
|
Typically 1s (0 to 90% of meas. value)
|
Display refresh rate
|
Typically 0.5 seconds
|
Display type
|
LCD 4 digit
|
Audible alarm
|
Buzzer
|
Measurement units
|
mV/m, V/m, μA/m, mA/m, μW/m²,
mW/m²,W/m², μW/cm², mW/cm²
|
Measurement display value
|
Instantaneous measured value, maximum value,
average value, or maximum average value.
|
Measurement alarm function
|
Adjustable threshold with ON/OFF
|
Measurement calibration factor CAL
|
Adjustable
|
Manual data memory and read storage
|
99 sets (only recall by meter)
|
Battery
|
9V
|
Battery life
|
>15hours
|
Dimensions
|
Approx. 60(W) x 60(T) x 237 (L)mm
|
Weight (including battery)
|
Approx. 200g
|
Related products
EMF Tester
EMF Tester