Mahr Metrology MarForm MMQ 500
The new MMQ 500 – the best choice among table form testers
- Fast: More capacity on the form tester
- Universally applicable: From small to large, heavy workpieces
- Software that is intuitive to use: Short learning phase
- Exactly: even with decreasing tolerances
The new MMQ 500 is the best choice among tabletop form testers due to its wide range of options for high-precision measurements. Thanks to the optimized mechanical design, it can be used universally and enables maximum utilization. The innovative device design makes operation child’s play: you can position all components in the optimum position for your measurement with just one hand. With the clever, powerful software, setting up and measuring is quick and reliable.
- Universally applicable for small workpieces from a few millimeters in size up to
- heavy workpieces up to 80kg
- Measurement of form, position, roughness, contour and twist in one measuring process
- Intuitive to use software
- Highest axis accuracy even with decreasing tolerances
- Best repeatability even with difficult measuring tasks
Fast alignment
The newly developed centering and tilting table enables faster alignment than comparable models, thus increasing efficiency and productivity.
High load capacity
You can also measure heavy workpieces with a mass of up to 80 kg thanks to the particularly powerful ZK table.
| MarForm MMQ 500 | Item No. 5440901 | |
|---|---|
| Roundness deviation (µm+µm/mm measuring height) * | 0.01 + 0.00025 |
| Straightness deviation / total measuring range (µm)**, Z-axis | 0.3 |
| Parallelism deviation Z / C axis in scanning direction, measuring path (µm) | 0.6 |
| Measurement speed (mm/s), Z-axis | 100 |
| Roundness deviation (µm+µm/mm measuring height) ** | 0.02 + 0.0005 |
| Axial run-out (µm+µm/mm measuring radius) * | 0.02 + 0.0001 |
| Axial run-out (µm+µm/mm measuring radius) ** | 0.04 + 0.0002 |
| Centering and tilting table | automatically |
| Table diameter (mm) | 300 |
| Table load capacity, centric (N) | 800 |
| footer text | * Values as maximum deviation from reference circle LSC, filter 15 waves/circumference. ** All values according to DIN ISO 1101 at 20 °C ±1 °C in a vibration-free environment, filter 15 shafts/circumference LSC or 2.5 mm LSS, 5 revolutions 1/min or 5 mm/s and standard stylus arm with ball diameter 3 mm. Proof on the standard including error separation methods. Due to the large number of possibilities, only a few machines are described here as examples. The technical data of “your” MMQ is available from Mahr on request. |
Related products
Universal form measuring machine
Shaft Measuring System