Hanna Instruments HI991001 Waterproof Portable pH/Temperature Meter
The HI991001 is a small, water-resistant, handheld pH/temperature meter that comes with everything you need, including a durable carrying case and a special titanium pH electrode with an integrated temperature sensor. For convenient viewing of the pH, temperature, and status indications, the meter has a sizable, dual-level LCD display. The meter’s controls are reduced to two buttons. The HI991001 has a battery life of 1400 hours, which is exceptionally lengthy.
- Automatic Temperature Compensation
- Automatic Two-Point Calibration
- Waterproof
With a 0.01 pH resolution and an accuracy of 0.02 pH, the HI991001 meter’s wide multi-level LCD screen simultaneously shows pH and temperature measurements. Additionally, the LCD panel offers on-screen instructional instructions and indicators for calibration stability and status. Numerous cutting-edge capabilities, such as automatic calibration, buffer identification, and temperature adjustment, are present in the HI991001, which are often only seen in more expensive portable instrumentation. At startup, the battery percentage level is shown to inform the user of the remaining battery power.
- Titanium body that is resistant to harsh chemicals
- Pre-amplified and matching pin for resistance to electrical noise
- Extractable cloth junction to clear any clogging
- Built-in temperature sensor for automatic temperature compensated readings
Features at-a-glance
Waterproof
- Designed to float if accidentally dropped in a tank
Expanded pH Range
- pH range is from -2.00 to 16.00 pH
- One or two-point calibration is automatic to two selectable buffer sets (4.01, 7.01 and 10.01 or NIST 4.01, 6.86, and 9.18).
Automatic Temperature Compensation
- All readings are compensated for variations in temperature
- Temperature displayed in °C or °F along with pH reading
Stability Indicator
- Meter displays a clock tag that will disappear when the reading has achieved stability
HOLD button
- Freezes reading on the display to allow recording of measurement
BEPS (Battery Error Prevention System)
- Meter will automatically shut off if there is not enough power to get an accurate measurement
Battery % level at startup
Low Battery Indicator
- When the level is below 5%, the battery symbol on the LCD blinks to indicate a low battery condition.
Auto-Off
- Meter automatically shuts off after 8 minutes of non-use to maximize battery life
Related products
Electrical Conductivity (EC)
Hanna Instruments HI9813-6 Portable pH/EC/TDS/Temperature Meter with CAL Check™
Electrical Conductivity (EC)
Hanna Instruments HI98195 Multiparameter pH/ORP/EC/Pressure/Temperature Waterproof Meter
Electrical Conductivity (EC)
Hanna Instruments HI991301 Portable Waterproof pH/EC/TDS Meter (High Range)
Electrical Conductivity (EC)
Electrical Conductivity (EC)