Coating Thickness Gauge TIME®2605

Features:

To obtain non-destructive measurements, magnetic induction (for ferrous materials) and eddy current (for non-ferrous materials) are used as the two operating principles.
Features two working modes: batch and direct, as well as continuous and single-measurement modes.
The mean, maximum, minimum, test numbers, and standard deviation are all included in statistics.
Storage for 10,000 data
Adjustment and Correction: A simple calibration approach may be used to remedy system errors.
Alarming feature: automatically sounds an alarm when measurement values exceed a preset limit.
Battery Warning: Low battery warning
Printing capability: measuring value and statistic value printing
Error message Function: Error notification upon malfunction in the display
Automatic or manual shutdown.

Specifications:

Probe	F1.5	N1.5	FN1.5	F1.5R	F3.5	FN3.5	F10
Working principle	Magnetic induction	Eddy current	Magnetic induction Eddy current	Magnetic induction	Magnetic induction	Magnetic induction Eddy current	Magnetic induction
Measuring range	0-1500 μm				0-3500 μm	F: 0-3500 μm N: 0-3000μm	0-10000 μm
Minimum resolution	0.1μm				0.1μm		1μm
Tolerance	±(1%H+1)				±(1%H+3)		±(1%H+5)
Min. curvature radius	Convex 1.5 mm				Convex 5mm		Convex 10mm
Min. area diameter	Φ7 mm				Φ10mm		Φ40mm
Critical thickness of the base	0.5 mm	0.3mm	F: 0.5mm N: 0.3mm	0.5 mm	0.5 mm		2mm
Temperature	10℃ – 30℃
Humidity	≤75%RH
Working environment	No strong magnetic field
Power	Li Battery 1 x 3.7V 2200mAh
Dimension	203.4 x 92.1 x 52.1 (mm)
Weight	400g (main unit)