Wind Speed Sensor 010C – Wind Direction Sensor 020D (1)

Wind Speed Sensor 010C – Wind Direction Sensor 020D

Features:

Low threshold for entry.
Long bearing life thanks to internal heater.
Slender to reduce “sensor turbulence”.
Elevated damping ratio.
A short delay time.
Connection with quick detach.
Electronic parts that can be changed in the field.
Level 65 of Ingress Protection (IP65).

Categories: Climatic/Environment Inspection, Weather Detector

Specifications:

Model 010C Wind Speed Sensor Specifications

Performance Characteristics
Maximum Operating Range	0-60 meters/sec or 0-125 mph
Starting Speed	0.27 meters/sec or 0.6 mph
Calibrated Range	0-50 meters/sec or 0-100 mph
Accuracy	1% or 0.15 mph
Temperature Range	-50C to +85C
Response	Distance constant less than 5 ft of flow*
The distance traveled by the air after a sharp-edged gust has occurred for the anemometer rate to reach 63% of the new speed. Distant constant less than 15ft of flow with optional 010C-1 aluminum cupset.
Electrical Characteristics
Power Requirements	12 VDC at 10 mA
Output Signal	11-volt pulse
Output Impedance	100 ohms maximum
Heater Power Requirement	12 VDC at 350 mA
Standard Cable Length	300’ maximum (consult factory if longer cable is to be used for special requirements)
Physical Characteristics
Weight	1.1 pounds
Finish	Anodized aluminum
Mounting	Use with 191 Crossarm
Cabling	1953-XX Cable (XX is cable length in feet)

Model 020D Wind Direction Sensor Specifications

Performance
Azimuth	Electrical 0-356, Mechanical 0-360
Threshold	0.6 mph
Linearity	 ½% of full scale
Accuracy	3
Damping Ratio	0.4
Delay Distance	Less than 3 feet
Temperature Range	-50C to +85C
Electrical Characteristics
Input Power	9-18 VDC, 10 mA
Output*	a. 0-5 volts for 0-360 (default setting) b. 0-2.5 volts for 0-360 (user selectable)
Output Impedance	100 Ohms maximum
Maximum Cable Length	300 feet
Physical Characteristics
Weight	1.1 pounds
Finish	Anodized Aluminum
Mounting	Use with Crossarm Model 191 or equivalent
Cabling	1957-XX Cable (XX is cable length in feet)