AutoMet 580 & 136 MultiMet Interface Module (1)

AutoMet 580 & 136 MultiMet Interface Module

Features:

AUTOMET 580

Ethernet, MODBUS, 12 analogue outputs, USB, RS-232C, and RS-485 are all capable of strong communication.
Averaging, maximum, minimum, delta, STD DEV, dewpoint, and other statistical computations.
For measurements of the global horizontal & plane of the array, matched pyranometer inputs.
For very precise and broad temperature readings, use the PT-100 platinum temperature inputs.

136 MULTIMET INTERFACE MODULE

12 analogue outputs and 8 analogue inputs.
3 MET or AIR sensors can be used as Met One digital sensor inputs.
logging data.
Different serial outputs
RTU MODBUS.
Sixteen-bit resolution
Fully Field Modifiable and Configurable.
Economical.

Categories: Climatic/Environment Inspection, Weather Detector

136 MULTIMET INTERFACE MODULE Specifications:

PARAMETER	SPECIFICATION
Analog Sensor Inputs	8 channel single ended 0 – 2.5 or 0 – 5 VDC user selectable, with 136 Multi- Met Interface Module Auto ID Sensor option 2 channel inputs for small signal solar radiation sensors 3 channel inputs for RTD platinum temperature sensors
Special Input	2 channel frequency counters (wind speed frequency selectable as low or high range or low AC millivolt 1 channel rain gauge channel (de-bounced switch closure with excitation resistor to 5 volts)
Digital Sensor Inputs	Multiple Digital sensors, 8 channels max (Met One Instrument Sensors)
Voltage Outputs	12 voltage output channels 16 bits unipolar 5.000VDC full scale (selectable to 1.000 or 2.5 VDC full scale) +/- 4 millivolts accuracy
Alarm Outputs	2 alarm channels with N.O. relay contacts (max power 24 VDC @ 20 mA)
Communication	Ethernet serial port, 38400 baud fixed USB serial port shared with main port Main RS-232 serial port, 1200-115200 baud, ASCII, N, 8, 1 Digital Sensor, RS-232, 9600 baud fixed RS-485 Extra port, RS-232, 1200-115200 baud
Communication Protocol	7500 MetRecord Protocol for digital sensors and serial communications UIM serial report string Modbus
Log Channels	16 logging channels (combination of digital, analog measurements, and calculated values)
Logging Data Capacity	1-minute data – 7.2 days 5-minute data -36 days 10-minute data – 72 days 15-minute data – 108 days 30-minute data – 216 days 1 hour – 433 days (1.2 years)
Power Requirements	15 VDC ± 20% 50 mA or less (display off) 125 mA (display on)
Power Source	120-240 VAC, 50-60 HZ to 15 VDC power supply (included) Solar panel array and battery (optional) Battery and AC powered charger (optional)
Display	Backlit LCD with auto time-out 40-character width Eight lines
Keypad	Four operation selection keys Four motion selection keys Four function selection keys
Environmental	Operating temperature range: -20°C to +60°C (extended range available) Humidity: 0-100%, non-condensing

Physical Specifications

PARAMETER	SPECIFICATION
Dimensions	15.5 in (high) x 13.5 in (wide) x 7.0 in (depth)
Weight	7.8 lbs (3.5kg)

AUTOMET 580 Specifications:

PARAMETER	SPECIFICATION
Analog Sensor Inputs	8 channel single ended 0 – 2.5 or 0 – 5 VDC user selectable, with AutoMet Auto ID Sensor option 2 channel inputs for small signal solar radiation sensors 3 channel inputs for RTD platinum temperature sensors
Special Input	2 channel frequency counters (wind speed frequency selectable as low or high range or low AC millivolt 1 channel rain gauge channel (de-bounced switch closure with excitation resistor to 5 volts)
Digital Sensor Inputs	Multiple Digital sensors, 8 channels max (Met One Instrument Sensors)
Voltage Outputs	12 voltage output channels 16 bits unipolar 5.000VDC full scale (selectable to 1.000 or 2.5 VDC full scale) +/- 4 millivolts accuracy
Alarm Outputs	2 alarm channels with N.O. relay contacts (max power 24 VDC @ 20 mA)
Communication	Ethernet serial port, 38400 baud fixed USB serial port shared with main port Main RS-232 serial port, 1200-115200 baud, ASCII, N, 8, 1 Digital Sensor, RS-232, 9600 baud fixed RS-485 Extra port, RS-232, 1200-115200 baud
Communication Protocol	7500 MetRecord Protocol for digital sensors and serial communications UIM serial report string Modbus
Log Channels	16 logging channels (combination of digital, analog measurements, and calculated values)
Logging Data Capacity	1-minute data – 7.2 days 5-minute data -36 days 10-minute data – 72 days 15-minute data – 108 days 30-minute data – 216 days 1 hour – 433 days (1.2 years)
Power Requirements	15 VDC ± 20% 50 mA or less (display off) 125 mA (display on)
Power Source	120-240 VAC, 50-60 HZ to 15 VDC power supply (included) Solar panel array and battery (optional) Battery and AC powered charger (optional)
Display	Backlit LCD with auto time-out 40-character width Eight lines
Keypad	Four operation selection keys Four motion selection keys Four function selection keys
Environmental	Operating temperature range: -20°C to +60°C (extended range available) Humidity: 0-100%, non-condensing

Physical Specifications

PARAMETER	SPECIFICATION
Dimensions	15.5 in (high) x 13.5 in (wide) x 7.0 in (depth)
Weight	7.8 lbs (3.5kg)