Particle Counter TES-5200

Product Features

In one portable device, you can measure particle mass and count them.
Eight particle sizes and six mass ranges.
K-factor settings for certain particles with varying densities should be used.
Integrated humidity and temperature sensor (no need for external add-on).
2.83 L per minute (0.1 CF per minute) flow rate.
Battery that can be recharged offers up to 4 hours of continuous use (charge time 2.5 hours).
Up to 500 measurement data sets may be stored in and shown again using the buffer feature.
SD memory card.

Specification

Optical system	Sideway light-scattering method
Light source	Laser diode
Laser product class	Class 1, IEC 60825-1 / EN 60825-1
Mass
Mass concentration ranges	PM1, PM2.5, PM4, PM7, PM10, and TSP
Concentration range	0 to 1000 ug/m³
Sample time	1 minute (2.83 L / min)
Particle:
Particle size (8 channels)	0.5um、0.7um、1.0um、2.5um、4.0um、5.0um、7.0um、10um
Counting Efficiency	100% for particles > 0.45um (per JIS B9921:1997)
Sample flow rate	2.83 L / min
Maximum particle concentration	70,000 particles / L (coincidence loss max. 5%)
Measurement time	6 s. (0.01CF), 21 s. (1L), 1 min. (0.1 CF, 2.83L), 3 min. 32 s (10L), 10 min. (1 CF, 28.3L), any length (MANUAL), any length (1 s. to 59 min. 59 s.)
Relative Humidity	±7%, 20% to 90% non-condensing
Temperature	±3°C, 10°C to 40°C (50°F to 104°F)
Buffer function	Store and recall values for up to 500 measurements
PC interface	USB interface
Temperature / humidity measurable range	10°C to 40°C, 20% to 90%RH (approximate)
Power requirements	Built-in battery or AC adapter
Battery	Rechargeable Lithium-ion (Li-ion) battery. Charged from supplied AC adapter when power is ON (charge time 2.5 hours).
AC adapter	Output voltage : DC12V, 3A
Dimensions and weight	218(L) ×110(W) ×67(H)mm / Approx. 875g
Supplied Accessories	Instruction manual,AC adapter,Power cord,USB cable,Zero count filter,Hardshell carrying case.