Hanna Instruments HI98199 Multiparameter Portable pH/EC/DO Waterproof Meter
A robust, transportable multiparameter meter with a single digital probe input is the HI98199. You can attach a pH, conductivity, or dissolved oxygen probe to the digital probe input. The HI98199 can measure up to 10 water quality parameters using the three probes and an integrated barometric pressure transducer, with 5 being measured by sensors and the remaining 5 being calculated (i.e. EC to TDS). This expert, IP67-compliant waterproof meter comes with all required pH/temperature measurement accessories bundled in a tough carrying case.
- Digital Electrodes
- USB-C for Data Transfer
- Dot Matrix Display
Superior toughness
This meter is designed to survive immersion in 1m of water for up to 30 minutes and has an IP67 rating, making it waterproof. The battery compartment and connectors on the meter are sealed with rubber gaskets and epoxy to keep out any water that could harm the internal electronics. The HI98199 will fit comfortably in your hand and be waterproof, providing years of use.
Display with Dots
A user is directed through any setup configuration or calibration thanks to the huge dot matrix display’s simple user interface. Contextual help relevant to the current screen is available with a dedicated help key. The dot matrix display may be viewed in direct sunlight and features a backlight for viewing in dim light
Keypad in Alphanumeric
Virtual keys and the low-profile vulcanized rubber keypad provide quick password, user ID, and sample site entry. To stop unauthorized changes, the setup of the meter can be password-protected. Any documented readings include the user and sample IDs, which can be uploaded to a PC for analysis or long-term record keeping.
The dedicated Good Laboratory Practice (GLP) button on the meter can be used at any time to read the calibration details for a connected probe. Date, time, calibration points, and probe characteristics are all part of the calibration information.
| SKU | HI98199 |
|---|---|
| Product Name | Multiparameter Portable pH/EC/DO Waterproof Meter – HI98199 |
| Quote Required | Yes |
| pH Range | 0.00 to 14.00 pH |
| pH Resolution | 0.01 pH |
| pH Accuracy | ±0.02 pH |
| pH Calibration | automatic one, two, or three points of five standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer |
| pH Temperature Compensation | yes |
| mV Range | ±600.0 mV |
| mV Resolution | 0.1 mV |
| mV Accuracy | ±0.5 mV |
| EC Range | 0 to 200 mS/cm |
| EC Resolution | 1 μS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm |
| EC Accuracy | ±1.5% of reading or ±2 μS/cm whichever is greater |
| EC Calibration | automatic single-point, with six standard solutions (84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point |
| TDS Range | 0.0 to 200.0 ppt (g/L) (the maximum value depends on the TDS factor) |
| TDS Resolution | 1 ppm (mg/L); 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L); 1 ppt (g/L) |
| TDS Accuracy | ±1% of reading or ±1 ppm (mg/L) whichever is greater |
| TDS Calibration | based on conductivity calibration |
| EC/TDS Temperature Compensation | yes |
| Temperature Correction Coefficient | 0.00 to 6.00 %/°C |
| EC to TDS Conversion Factor | 0.00 to 1.00 |
| Reference Temperature | 25 °C or 20 °C |
| Cell Type | four ring |
| EC/TDS Multi-range Measurement Modes | yes |
| Salinity (PSU) Range | 0.00 to 70.00 PSU |
| Salinity (PSU) Resolution | 0.01 PSU |
| Salinity (PSU) Accuracy | ±2% of reading or ±0.01 PSU whichever is greater |
| Salinity (PSU) Calibration | based on conductivity calibration |
| Salinity (Seawater Sigma) Range | 0.0 to 50.0 σt, σ0, σ15 |
| Salinity (Seawater Sigma) Resolution | 0.1 σt, σ0, σ15 |
| Salinity (Seawater Sigma) Accuracy | ±1 σt, σ0, σ15 |
| Salinity (Seawater Sigma) Calibration | based on conductivity calibration |
| Resistivity Range | 0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm |
| Resistivity Resolution | 1 Ω•cm; 0.1 kΩ•cm; 0.0001 MΩ•cm |
| Resistivity Calibration | based on conductivity calibration |
| Dissolved Oxygen Measurement Type | galvanic |
| Dissolved Oxygen Range | 0.0 to 500.0%; 0.00 to 50.00 ppm (mg/L) |
| Dissolved Oxygen Resolution | 0.1%; 0.01 ppm (mg/L) |
| Dissolved Oxygen Accuracy | 0.0 to 300.0% |
| Dissolved Oxygen Calibration | automatic one or two points at 0, 100% or one custom point |
| Dissolved Oxygen Temperature Compensation | yes |
| Barometric Pressure Compensation | yes |
| Salinity Compensation | yes |
| Temperature Range | -5.00 to 55.00 °C; 23.00 to 131.00 °F; 268.15 to 328.15 K |
| Temperature Resolution | 0.01 °C; 0.01 °F; 0.01 K |
| Temperature Accuracy | ±0.15 °C; ±0.27 °F; ±0.15 K |
| Temperature Calibration | automatic at one custom point |
| Temperature Compensation | automatic from -5 to 55 °C (23 to 131 °F) |
| Logging Type | continuous logging or log-on-demand |
| Logging Memory | 45000 records |
| Logging Interval | one second to three hours |
| Connectivity | via USB-C with Hanna software |
| Automatic Shut-Off | Not used (disabled), 5, 10, 15, 20, 30, 60 minutes |
| GLP | yes |
| Calibration Timeout Reminder | yes |
| Display | dot matrix |
| Battery Type/Life | 1.5V AA batteries (4) / approximately 400 hours of continuous use without backlight (50 hours with backlight) |
| IP Protection | IP67 |
| Environment | 0 to 50 °C (32 to 122 °F); RH 100% |
| Dimensions | 185.0 x 93.0 x 35.2 mm (7.3 x 3.6 x 1.4”) |
| Weight | 400 g (14.2 oz.) |
| Ordering Information | HI98199 is supplied with the HI829113 pH digital probe with 4m (13’) cable, pH calibration solution sachets, PC software, micro USB cable, batteries, quality certificate, and instruction manual in a rugged carrying case. |
| Atmospheric Pressure Range | 450 to 850 mmHg; 17.72 to 33.46 in Hg 600.0 to 1133.2 mbar; 8.702 to 16.436 psi 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa |
| Atmospheric Pressure Resolution | 0.1 mmHg; 0.01 in Hg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa |
| Atmospheric Pressure Accuracy | ±3 mmHg within ±15 °C from the temperature during calibration |
| Atmospheric Pressure Calibration | automatic at one custom point |
Related products
Biochemical Oxygen Demand (BOD)
Hanna Instruments HI98193 Waterproof Portable Dissolved Oxygen and BOD Meter
Dissolved Oxygen (DO)
Hanna Instruments HI9147 Portable Galvanic Dissolved Oxygen Meter
Dissolved Oxygen (DO)
Hanna Instruments HI98494 Multiparameter Bluetooth® portable pH/EC/OPDO Meter
Electrical Conductivity (EC)
Hanna Instruments HI98197 Ultra Pure Water EC/Resistivity Waterproof Portable Meter
Electrical Conductivity (EC)
Hanna Instruments HI98192 Waterproof Portable EC/TDS/Resistivity/Salinity Meter
Electrical Conductivity (EC)